As an Amazon Assistant, I earn my money through qualifying purchases.

The best mini-ITX NAS enclosure is ideal for configuring systems with high upgrade potential. But at the moment it is a bit difficult to determine the right NAS system without the right information.

But don’t despair!

In this review, take a look at five of the best cases of mini-ITX with NAS support. Further examination of these cases and their characteristics does not facilitate a rapid decision.

Before consulting the editor’s recommendations, the comparison table and the reviews, read the following section for more information. You will undoubtedly know all the advantages of buying your next mini-ITX case, right now!

Why you should design your Mini ITX enclosure from scratch

Increasing modernisation potential

Pre-configured ITX systems are fine, but when it comes to upgrading, many systems are short-lived.

Manually configured systems, on the other hand, have an increased upgrade potential for multiple components. If you are interested in the future, you should therefore build your ITX system from scratch.

Increased hardware flexibility

With a standard ITX chassis with NAS support, it’s easy to find enough space for your individual hardware problems.

Installing multiple hardware components makes it more convenient to configure your system than the assigned options.

Self-installation experience

If you build your own ITX box, you’ll have enough experience to perform even complex hardware assembly tasks effortlessly.  With a lot of experience in simple design tasks, it is easier for you to increase the uptime of your system.

Selection of the best publisher

Heat-absorbing core P1 hardened

Heat absorption core P1 toughened glass

  • 5 mm thick tinted tempered glass
  • Aio/LCS 120/240 mm cooling stand
  • Introduction of the Ultimate GPU : Present your graphics card to anyone thanks to a vertical mounting (mini lift cable included)

Given the power of this small ITX box, it is no wonder that many customers prefer it when building their PCs.

With its LCS and AIO cooling slots, it offers impressive support for various cooling racks. The 120 mm and 240 mm coolers are fully supported by this ITX box.

It also has a three-way positioning system that’s perfect for hassle-free installation of your configured system. You can mount it on the wall, horizontally or vertically.

All these brilliant features are fully covered by the manufacturer’s generous three-year warranty. In addition to its excellent performance under warranty, the tempered glass panel makes it a beautiful eye-catcher in any installation.

Best Mini-ITX NAS network storage enclosures

The hardcoreCORSAIR 240 is the best case for a home server.

CORSAIR 240 Micro-ATX Solid State Aircraft and...

CORSAIR 240 Micro-ATX Solid State Aircraft and…

  • An impressive yet small PC case with Mini-ITX or MicroATX support and excellent cooling performance – it comes with three 120 mm fans.
  • Cleaning composition for the final cooling of the cabin; enclosure window: acrylic
  • Do you like water? Use two 240 mm heat sinks with Mini-ITX or one 240 mm heat sink with a MicroATX configuration with two GPUs.

With a variety of features and a format suitable for multiple expansions, you should take a look at this NAS compatible enclosure. It has many components that can be adapted to your equipment construction now and can be used later.

Due to the maximum length of the cooling fan of 120 mm, in this case several three 120 mm fans can easily be accommodated in this small ITX housing.

It also provides full support for a 240mm radiator so that all components stay cool and have access to the air they need.

With support for 3.5 and 2.5 hard disk bays, this speaker has the potential to provide maximum capacity. All your storage needs are verified in this enclosure and you can easily install multiple drives.

In this case, two USB 3.0 ports are available. These plugs make it super handy to connect to other devices after installation.

With an impressive maximum length of 290 mm, the GPU does not lack space in this case. In this case, it is easier than ever to match graphics cards of different sizes.

The innovative design of this NAS enclosure is aimed at better air circulation. It also has a form factor that can easily accommodate different components of a typical size.

In addition, the tool-free installation and removal of the reader makes this case an excellent choice for the trouble-free replacement of the reader. It has a sufficient number of pre-installed holes in various places to facilitate the installation of the radiators.

And that’s not all, because this package supports a three-sided investment model. With this rubber base you can install it as a standard, inverted or table tower. This speaker also includes a panorama window for easy viewing of the entire integrated system.

Despite the high price, this mini-ITX case is a popular choice for many buyers. Consider making it yours if you can pay his bill without any problems.

The P1 hard core with heat trapis the best NAS enclosure with glass and open frame panel.

Heat absorption core P1 toughened glass

Heat absorption core P1 toughened glass

  • 5 mm thick tinted tempered glass
  • Aio/LCS 120/240 mm cooling stand
  • Introduction of the Ultimate GPU : Present your graphics card to anyone thanks to a vertical mounting (mini lift cable included)

This ITX NAS enclosure has a limited design and offers significant support for different needs. Read the specifications and features carefully. This may be the case if you need to create your PC.

Based on a diameter of 120/240 mm, this enclosure offers the right design for increased cooling capacity.

In addition, five millimetre thick tempered glass is an ideal choice for building durable yet stylish appliances.

It has a 170 mm high support for cooling the CPU, which offers a high ventilation potential. The maximum length of the power supply is 180 mm, so this option is easily suitable for multiple brands.

Two USB 3.0 ports and a HD audio port in this small ITX box. You can be sure of extensive support for installing drives with at least five different power outlets.

The open panoramic window of this loudspeaker provides a better view of the installed unit. And thanks to its three-sided placement, this case fits almost anywhere.

It provides full support for native radiator options and ensures you get the most out of the vents.

If you can use an M-ITX enclosure without a fan, you must select this option. It has a wide range of features to meet the needs of your device.

The thermal cameraV1 SPCC is the best PC housing for the NAS.

Sale

Heat absorption core V1 SPCC Mini ITX Cube ...

Heat absorption core V1 SPCC Mini ITX Cube …

  • Mini ITX motherboard support
  • 2x USB 3.0, 1x headset, 1x front microphone socket, Internal compartment: 2x 3.5in, 2x 2.5in 1 x ventilator 200mm,…
  • Interchangeable side panels : Symmetrical panels to build a system with personality

With an innovative design aimed at creating sufficient space for your hardware components, you should consider this case. Without a doubt, it has many properties that many system builders will immediately take to heart.

With two USB 3.0 ports, this box offers extensive connectivity for different devices.
The support of a 140 mm fan is a further advantage in this ITX case. The chassis features a wide 285mm VGA support, making it an ideal choice for multiple connectivity and display options.

With its interchangeable side panels, this box allows a high degree of customisation during installation.
It also features an innovative adjustable I/O panel. This control panel is less problematic for proper operation.

Consider making this limited budget house your favorite choice for infallible building potential. It comes with all the right compartments, perfect for multiple generic brands.

Supermicro Superchassis CSE-721TQ – Premium NAS enclosure with 250Wpower support .

CSE-721TQ-250B Supermicro Envelope ...

CSE-721TQ-250B Supermicro Envelope …

  • Form Factor : The motherboard of the mini monitors supports the Supermicro Mini-ITX 6.75 x 6.75,…
  • Intel and AMD processors only
  • Storage enclosure: 4x 3.5 SAS/SATA hot-swap, 2x 2.5 hard disk bays, only SAS or SATA enterprise hard disk recommended.

Read more about the features of this premium case. He may have everything you need to build a device.

The case has four bays for 3.5-inch drives and two bays for 2.5-inch internal drives. With these media it is possible to easily install multiple storage devices.
It also has a miniature design that is perfect for mounting multiple 6.75 x 6.75 m ITX motherboards.

The mesh panel and perforated trunk ensure high airflow through this cooler. And thanks to the impressive design, the ease of maintenance is even greater.
In addition to its innovative design, this case weighs just 11 pounds, making it a first-class choice for easy installation.

With advanced design and multiple compartments to meet your needs, this can be the perfect case for m-ITX.

Cooler Master Elite 110 RC – Mini ITX server cabinet for the best budget

Master Elite 110 Cooler RC-110-KKN2

Master Elite 110 Cooler RC-110-KKN2

  • Compatibility with Mini-ITX motherboards
  • Mesh front panel provides excellent air circulation from front to rear
  • Supports standard ATX power supplies up to 180 mm in length

If you are an economical buyer, you want to take a look at this m-ITX server case. It has all the features needed to meet many device manufacturing needs without the overhead.

The case is suitable for graphic cards up to 8.3 in length. In addition, this disc provides full support for a 120 mm front cooling system.

In this case there are bays that can accommodate up to seven internal disc compartments.

The mesh front of this system is ideal for increasing airflow through your hardware components.

It also supports multiple disk sizes for easy customization of storage devices.

With the included front fan, this ITX box provides excellent support for better air circulation. Don’t forget to make it your first choice, especially if you have a limited budget.

Frequently asked questions

What should I pay attention to when choosing a mini-ITX enclosure with NAS support?

  • Hot swap support
  • Diameter of the front ventilation slot
  • Control cabinet design
  • Assembly capacity
  • Hooks for the installation of identical parts
  • USB ports
  • Airflow potential
  • Portability

What are the best cases of mini-ITX for sale?

  • Master Elite 110 RC Chiller
  • Carbide CORSER 240 aircraft
  • Supermicro Chassis CSE-721TQ
  • Heat-absorbing core P1 hardened
  • Thermal Explosion Core V1 SPCC

How many heat sinks should there be in a standard mini-ITX NAS housing?

Standard NAS compatible mini-ITX enclosures typically have one to more than three heatsink slots. Some innovative designs may require fewer openings due to better airflow through the housing.

What is the budget for the ITX case with SIN support?

You can buy a NAS-compatible mini-ITX enclosure for $70. In addition, some high-end options may cost between $150 and $300 or more.

Endwords

If you are looking for a mini-ITX box with high support for multiple discs, consider the CORSAIR Carbide AIR240.

And if you are looking for a thin but powerful case, consider the P1 heat absorption core.

Like the M-ITX chassis that supports multiple slots and drive bays? Consider ordering the SPCC Thermaltake Core V1.

The Supermicro CSE-721TQ Superchassis is another excellent choice to ensure better access control to your devices.

Finally, the Cooler Master Elite 110 RC is an excellent choice for building a gaming PC or computer in general.

Each of these ITX cases has a peculiarity. All you have to do is find an option that perfectly suits your needs and respects your budget.

Is maximum speed (225 Mb/s) possible over USB 3.0?A1. Now this will entirely depend on multiple factors just like the speed from your ISP service. Moreover, it also depends on the number of files and the available size. If it's not getting the right speed, you can have a look at the local disc speed a swell. So if you have the right combination available, it's not going to be a big issue for you.How much clearance for airflow is recommended?A3. Well, it always depends on the number of discs that you have in the NAS case. If you have connected to multiple disks, it will have a higher chipset configuration. So here, the heat generation will be much more. I have faced such issues while working in my office. But for my home, I've kept a 1-feet distance from the radiator to keep good airflow and it seemed to work well.Can two of the 2bay models be connected via Ethernet?A5. Of course, you can and it can be very interesting if you do such. I've tried along with the EX2 NAS device by adding two devices to the router. Well, you need to have two separate Ethernet cables with a pin to configure them and use them. So using two devices beside each other is never a big problem for you. You need to add a static IP address to all the NAS systems present.Does it include protection software against the virus?A7. Honestly, I haven't seen much software present in any of the products that I have used. So the answer to the question is probably not. However, you may expect a basic level of encryption for better security, but keeping your devices safe with anti-malware software is always important.,A1. Now this will entirely depend on multiple factors just like the speed from your ISP service. Moreover, it also depends on the number of files and the available size. If it's not getting the right speed, you can have a look at the local disc speed a swell. So if you have the right combination available, it's not going to be a big issue for you.,A3. Well, it always depends on the number of discs that you have in the NAS case. If you have connected to multiple disks, it will have a higher chipset configuration. So here, the heat generation will be much more. I have faced such issues while working in my office. But for my home, I've kept a 1-feet distance from the radiator to keep good airflow and it seemed to work well.,A5. Of course, you can and it can be very interesting if you do such. I've tried along with the EX2 NAS device by adding two devices to the router. Well, you need to have two separate Ethernet cables with a pin to configure them and use them. So using two devices beside each other is never a big problem for you. You need to add a static IP address to all the NAS systems present.,A7. Honestly, I haven't seen much software present in any of the products that I have used. So the answer to the question is probably not. However, you may expect a basic level of encryption for better security, but keeping your devices safe with anti-malware software is always important.,nzxt h200i,best mini itx case 2020,best mini itx case reddit,dancase a4-sfx,cooler master elite 110,nfc s4 mini,itx asus,z11 asus,x570 itx 4 dimm,mini itx 64gb ram 2019,itx server motherboard,amd ryzen mini itx,best nas motherboard 2020,asrock 2550,asrock h370m,asrock rack c236 wsi,ga-7tesm,gigabyte c246-wu4,mini itx nas motherboard,cs01b-hs,nas case 8-bay,lian li q25,sst ds380b tower chassis hardware electronic,istarusa s 35 3x 5.25 bays mini itx tower,nzxt h400i,antec p6,best micro atx case reddit,best budget micro atx case,white micro atx cases,smallest micro atx case,2-bay mini itx case,a7879 4-bay nas chassis,cfi a2059,in-win iw-ms04-01,silverstone technology ds380,nzxt h1,best mini itx cases,best mini itx motherboard,best mini itx motherboard 2020,itx case with best thermals,best mini itx case htpc

You May Also Like

AMD Radeon RX 6600 XT Introduction

I’ll be honest. I didn’t want to do this review but here…

10 Best TMs in Pokémon Diamond, Pearl & Platinum (Ranked) –

With the incredible Gen IV remakes, nostalgia for these games has reached…

Top 10 Easiest Bosses in Old School RuneScape (Ranked) –

Old School RuneScape is one of the most popular and highest-grossing games…

Crazy Idea #1 for A New MMORPGs – Rollercoaster Tycoon!

In general, I’ve been a pretty easy MMO player over the years.…